12,989 research outputs found

    Determination of effective stress-effective strain relationship for use as a machinability index

    Get PDF
    In recent work it has been shown that the effective stress effective strain relationship of a work material is important in determining the shear angle in orthogonal cutting. This note describes the method of obtaining this relationship

    Solar energy conversion through the interaction of plasmons with tunnel junctions. Part A: Solar cell analysis. Part B: Photoconductor analysis

    Get PDF
    A solar cell utilizing guided optical waves and tunnel junctions was analyzed to determine its feasibility. From this analysis, it appears that the limits imposed upon conventional multiple cell systems also limit this solar cell. Due to this limitation, it appears that the relative simplicity of the conventional multiple cell systems over the solar cell make the conventional multiple cell systems the more promising candidate for improvement. It was discovered that some superlattice structures studied could be incorporated into an infrared photodetector. This photoconductor appears to be promising as a high speed, sensitive (high D sup star sub BLIP) detector in the wavelength range from 15 to over 100 micrometers

    The Management of Pay as the Influence of Collective Bargaining Diminishes.

    Get PDF
    The management of pay in Britain has changed substantially in recent years. The paper starts with a theoretical discussion of the extent to which individual employers can exercise discretion in the management of their employees' pay. It then examines the ways in which pay is used to secure productive effort. An analysis of the influence of trade unions leads on to an examination of the diminishing influence of collective bargaining in British pay determination. The implications of this are discussed for employer pay strategies, within and between firms, and internationally. It concludes with the consequences of diminishing trade union influence for the distribution of pay.wage determination; collective bargaining; remuneration management; bargaining structure; income distribution; trade union effects; employer pay strategy

    A review of knowledge: inter-row hoeing & its associated agronomy in organic cereal & pulse crops

    Get PDF
    The aim of this project was to establish the “state of the art” for inter-row hoeing and its associated agronomic practices in organic cereal and pulse crops. To achieve this a detailed review of literature was undertaken. • To facilitate inter-row cultivation in cereal and pulse crops, some adjustment of row spacing may be required. For cereals, drilling crops in 25 cm rows can reduce yield compared with normal drilling practice, primarily due to greater intra-specific competition amongst the crop (i.e. competition between crop plants). • The yield penalty resulting from widely spaced crop rows can be minimised using a number of approaches, depending on the drill: 1. Reducing the seed rate in widely spaced crop rows can help to minimise excessive intra-specific competition. 2. Band sowing the crop in wide rows can also help to minimise intra-specific competition as the seed is distributed over a greater area. 3. Using a twin-row arrangement can completely overcome the yield penalty. • The recommended row spacing for peas (up to 20 cm) and beans (up to 35 cm) does not require any further adjustment for inter-row hoeing. • Recent developments in automated guidance of inter-row hoeing equipment mean that weeding operations can now be conducted a much higher speeds (10 km h-1). This has highlighted the limitations of some of the cultivators currently used (e.g. ‘A’ blades), as excessive soil throw can occur at this high speed. Rolling cultivators may prove to be the most suitable at high forward speeds. For manually guided hoes working at slower speeds (5 km h-1), ‘A’ and ‘L’ blades offer an effective low cost solution. • In terms of the timing of inter-row hoeing, it is suggested that weeding operations should be conducted at an early stage in the growing season, as the weeds that emerge with or shortly after the crop are the ones that pose the most significant threat for crop yield. Weeding on two occasions can provide better levels of weed control than weeding once, but weeding more frequently offered little additional benefit. Reductions of weed biomass of up to 99 % have been reported as a result of inter-row hoeing, although this has not always resulted in a positive crop yield response. This is probably due to crop damage resulting from inaccurate hoeing, a problem that can be overcome with automated guidance. • There is some evidence to suggest that mechanical weeding operations can mineralise soil bound nitrogen. • The impact of inter-row hoeing on ground nesting birds is uncertain. Early indications suggest that skylarks prefer to nest directly adjacent to or in the crop row rather than between rows. The information contained within this review should enable farmers to make best use of inter-row hoeing in their arable crops. There are a number of areas that require further research and development: • The interaction of seed rate and row spacing needs to be confirmed in organic systems. • Relatively little is known about the mechanisms of weed kill and the detailed interaction between the cultivator blade, the weed and the soil. This is particularly important with the new automated guidance equipment that allows weeding at high forward speeds. • The timing and frequency of inter-row hoeing has received very little attention. The optimum weed control timings are based on small-plot crop:weed competition studies and need to be verified under field scale management with inter-row hoeing equipment. • Finally, the impact of inter-row hoeing and widely spaced crop rows on ground-nesting birds has not been looked at directly, but is of importance. Please see the main report for a more detailed summary before the full text

    Applying metabolomics to cardiometabolic intervention studies and trials: past experiences and a roadmap for the future

    Get PDF
    Metabolomics and lipidomics are emerging methods for detailed phenotyping of small molecules in samples. It is hoped that such data will: (i) enhance baseline prediction of patient response to pharmacotherapies (beneficial or adverse); (ii) reveal changes in metabolites shortly after initiation of therapy that may predict patient response, including adverse effects, before routine biomarkers are altered; and( iii) give new insights into mechanisms of drug action, particularly where the results of a trial of a new agent were unexpected, and thus help future drug development. In these ways, metabolomics could enhance research findings from intervention studies. This narrative review provides an overview of metabolomics and lipidomics in early clinical intervention studies for investigation of mechanisms of drug action and prediction of drug response (both desired and undesired). We highlight early examples from drug intervention studies associated with cardiometabolic disease. Despite the strengths of such studies, particularly the use of state-of-the-art technologies and advanced statistical methods, currently published studies in the metabolomics arena are largely underpowered and should be considered as hypothesis-generating. In order for metabolomics to meaningfully improve stratified medicine approaches to patient treatment, there is a need for higher quality studies, with better exploitation of biobanks from randomized clinical trials i.e. with large sample size, adjudicated outcomes, standardized procedures, validation cohorts, comparison witth routine biochemistry and both active and control/placebo arms. On the basis of this review, and based on our research experience using clinically established biomarkers, we propose steps to more speedily advance this area of research towards potential clinical impact

    A photospheric metal line profile analysis of hot DA white dwarfs with circumstellar material

    Full text link
    Some hot DA white dwarfs have circumstellar high ion absorption features in their spectra, in addition to those originating in the photosphere. In many cases, the line profiles of these absorbing components are unresolved. Given the importance of the atmospheric composition of white dwarfs to studies of stellar evolution, extra-solar planetary systems and the interstellar medium, we examine the effect of including circumstellar line profiles in the abundance estimates of photospheric metals in six DA stars. The photospheric C and Si abundances are reduced in five cases where the circumstellar contamination is strong, though the relative weakness of the circumstellar Si IV absorption introduces minimal contamination, resulting in a small change in abundance. The inability of previous, approximate models to reproduce the photospheric line profiles here demonstrates the need for a technique that accounts for the physical line profiles of both the circumstellar and photospheric lines when modelling these blended absorption features.Comment: 7 pages, 5 figues, 3 tables, accepted for publication in MNRA
    corecore